50kW L-Band 902-928 MHz Solid State High-Power Microwave Generator
Menu
50kW L-Band 902-928 MHz Solid State High-Power Microwave Generator
Key Features
- Generator is controlled with utilizing an easy to use, Windows™ based software package allowing control of:
- Frequency (902-928 MHz)
- Average power settings
- Frequency sweeping menu enabling electronic stirring within customer’s applicator
- Graphical display comparable to a vector network analyzer (VNA) showing best frequency selection based on load measurements.
- Built in Forward and Reflected power measurement when not using external high-power isolator
- Frequency and phase coherent capable between multiple generators
- Long Life, highly reliable construction
- WR975 Waveguide output with CPR975F Flange
Microwave Power Output
| Model | Max Nominal Power |
|---|---|
| PTL-50W9-PREHU-02 | 50 KW |
- Power set resolution input values: 1 watt
- Power Amplifiers: Rugged LDMOS transistors
- Comprised of Qty 22, 2.5 kW modular power blades
- Integrated RF output timer
- Power control accuracy: 0.1%
- Power measurement indicators: Forward & Reflected
- Maximum Reverse Power Handling: 12,000 W absolute
Frequency Range
Operating Modes
Control System
Software Highlights
Frequency Range
- 902-928 MHz
- Frequency Step Size: 100 kHz
Operating Modes
- Fixed, single frequency
Control System
- Windows-based interactive control software
- External E-Stop
- Local or remote operation
- Ethernet remote control
- PLC-type hardware control interface with 24VDC and 20ma current loop inputs and outputs
- Arc detection emergency stop inputs
Software Highlights
- Point and click power and frequency setting across the band
- Forward/Reflected power and return loss indicators
- Best frequency selection based on load measurements
- Variable power over frequency sweep creation tool
- Programmable initial pulse for applications such as gas / plasma ignite
Power Supply
Dimensions and Weight
Facility Requirements:
Power Supply
- AC mains: 380 or 480 VAC three phase delta 50/60 Hz configurable
- 50-volt switch mode power supply
- Air Cooled
Dimensions and Weight
- 52 in (132.1 cm) High x 54 in (137.2 cm) Deep x 54 in (137.2 cm) Wide
- Weight: 1650 lb (748.4 kg)
Facility Requirements:
- Input Water Flow Min: 25 GPM (95 LPM)
- Input Water Temperature: 15⁰C – 20⁰C
- Input Water Pressure: 60 Max PSI (2.5 Min–4.0 Max atm)
- Environmentally Controlled:
– Ambient Room: 15⁰C – 25⁰C
– Relative Humidity: < 95%
– Conditions must be non-condensing - Water Hook Up: 2 in OD NPT Threaded
- Heat Load: ~150kBTU/hr @ Full Power
These are preliminary specifications. The information contained herein is subject to change without notice.
Contact Us
1-800.USA.MADE
Crescend Technologies, LLC
100 High Grove Boulevard
Glendale Heights, IL 60139
USA